E60 Walk behind floor scrubber is an ELEREIN walk-behind floor scrubber. Confirm the visible cleaning width, tank capacity, runtime, aisle width and floor conditions before selection.
| Scrubbing /squeegee width: | 51/75cm |
|---|---|
| Solution/recovery tank: | 50L/60L |
| Suction vacuum: | 1720mmH2O |
| Brush motor power/speed: | 450W/140rpm |
| Maximum gradient: | 10% |
| Duration of working: | 3-5h |
| Vacuum motor: | 450W |
| Total power rating: | 900W |
| Operating voltage/charger: | DC24V/15A |
| Noise level: | 70-75dB |
| Cleaning efficiency: | 2200m2/h |
| Brush size /battery: | 20'INCH 100A*2PCS |
Ask for the product
Stainless Steel floor squeegee design
Ametek two layer UL class A vacuum motor
Curved squeegee design
Ultra-wide water injection hole design to meet different water injection needs
Water volume display tube, the water volume is clearly visible
Storage frame design, free your hands
Ergonomic armrest
Water volume adjustment handle
Ultra-large diameter solenoid valve design
With different battery systems and a wide range of additional features available, E60 Scrubber offers the right solution for every application, even for wor king in hygienesensitive areas
Slient design also available: Our Si lent Mode feature providing extremely low-noise working-ideal for use in hospitals and nursing homes.
The design of the E60 scrubber is particularly maintenance-friendly. Maintenance costscan be significantly reduced, which is yet a n o therimportant factor when it comes to increasing economically efficient operation.
Our E60 model is equipped with Amar and Ametek motor for improved hygiene, reduced odour development,and reduced costs due to a lower consumption of disinfectants.
The E60 scrubber focusses on maximm efficiency.The heavy-duty design-the machine is equipped with a brush unit and squeegees made of stainless steel-makes this scrubber particularly reliable while minimising repair costs and downtimes.Intuitive operation and superior ergonomics increase the user's productivity.
Daily maintenance made easy:tool-free access-for example to the solution filter.
Large tank opening, Easy-to-read filling level indicator, Easy-to-dose drain valves (recovery tank)
Product selection summary
E60 Walk behind floor scrubber is an ELEREIN walk-behind floor scrubber. Confirm the visible cleaning width, tank capacity, runtime, aisle width and floor conditions before selection.
The visible product data confirms Scrubbing /squeegee width: 51/75cm; Solution/recovery tank: 50L/60L; Suction vacuum: 1720mmH2O. Use the current product sheet to verify any field that is not shown.
| Scrubbing /squeegee width | 51/75cm |
|---|---|
| Solution/recovery tank | 50L/60L |
| Suction vacuum | 1720mmH2O |
| Brush motor power/speed | 450W/140rpm |
| Maximum gradient | 10% |
| Duration of working | 3-5h |
| Vacuum motor | 450W |
| Total power rating | 900W |
| Operating voltage/charger | DC24V/15A |
| Noise level | 70-75dB |
| Cleaning efficiency | 2200m2/h |
| Brush size /battery | 20'INCH 100A*2PCS |
E60 Walk behind floor scrubber is an ELEREIN Walk behind floor scrubber. Its suitability depends on the site conditions and the visible product parameters.
The visible page lists Scrubbing /squeegee width 51/75cm; Solution/recovery tank 50L/60L; Suction vacuum 1720mmH2O.
A walk-behind scrubber should not be selected from nominal productivity alone; route width, operator walking time, refill stops and floor conditions can reduce practical output.
Ask for the product
