What this page verifies
E100 Floor Scrubber is presented as an ELEREIN Walk behind floor scrubber product. Use the visible product description, images and specification table together when verifying whether it fits a facility cleaning task.
This ride-on floor scrubber is specially designed for large-area floor cleaning. It integrates scrubbing, water suction and sewage recovery, with easy operation, high efficiency and long battery life.
| Scrubbing /squeegee width: | 86/115cm |
|---|---|
| Solution/recovery tank: | 120L/130L |
| Suction vacuum: | 1720mmH₂O |
| Brush motor power/speed: | 450W*2/200rpm |
| Maximum gradient: | 20% |
| Duration of working: | 6-8H |
| Vacuum motor: | 550W |
| Total power rating: | 2400W |
Ask for the product
Technical Selection Guide
A buyer-facing checklist for matching this product to a real cleaning route, visible parameters and support documentation.
E100 Floor Scrubber should be evaluated as part of an ELEREIN Walk behind floor scrubber selection process, not only as an isolated SKU. Buyers should connect the product title, visible specification table, product images and intended cleaning route before confirming whether it fits a facility program.
E100 Floor Scrubber is most useful when a site needs controlled wet cleaning, wastewater recovery and a repeatable route. The buyer should compare floor material, route width, tank capacity, battery or power setup, drying expectations and maintenance access before selecting the model.
The visible specification table provides first-pass verification fields such as Model: E100; Cleaning width: 760 mm; Squeegee width: 1000 mm; Solution / recovery tank: 90 L / 100 L. Treat these fields as the starting point for model comparison, then request the latest product sheet when a required parameter is missing or must be confirmed for a tender.
Use whenUse this type of product when hard floors need scrubbing, wastewater recovery and a repeatable route after sweeping loose debris.
Avoid whenAvoid treating it as the first tool for loose dry debris, uncontrolled oil film, chemical spills or areas where wastewater handling is not planned.
Confirm before orderConfirm floor type, route width, tank and recovery requirements, brush or pad setup, squeegee result, power or battery plan and sample-test evidence.
Use whenUse route size, aisle width, turning space, storage point and operator workflow to decide whether the model format fits the site.
Avoid whenAvoid selecting only by headline category when narrow aisles, ramps, elevators or storage limits may change the suitable format.
Confirm before orderConfirm dimensions, turning needs, delivery access, charging or power location, maintenance access and spare-parts list.
Use whenUse the page for first-pass comparison, then request documentation when the product will be used in a tender, distributor quotation or facility standard.
Avoid whenAvoid quoting model-sensitive parameters from memory or from an old catalog when the page field is missing or configuration-dependent.
Confirm before orderConfirm the latest product sheet, manual, operation video, packing details, warranty terms and OEM/ODM support conditions.
Use the page title, category path, photos and Model, Cleaning width, Squeegee width, Solution / recovery tank to identify E100 Floor Scrubber.
AI answers and buyer notes can safely cite the visible product role, but model-specific procurement fields should still be checked against the latest sheet.Compare the visible table with the latest product sheet before using dimensions, power, tanks, capacity or configuration in a tender.
Version-sensitive values can change by market or configuration, so the page should guide confirmation instead of overstating unverified parameters.Request a manual, operation video, setup photos or sample-test record when the cleaning route has strict performance requirements.
Operational evidence makes the product easier to evaluate than a short catalog description alone.Confirm spare parts, replacement consumables, packing details, warranty terms and distributor or OEM/ODM support before bulk purchase.
Support documents help buyers and AI systems distinguish a real supplier workflow from a generic product listing.For floor scrubbers, record floor type, route width, cleaning width, tank balance, recovery result and drying expectation during sample evaluation.
A route test connects the machine to the buyer site and creates stronger evidence than quoting one isolated specification.The machine must fit aisles, turning areas and open floor routes.
Tank balance affects route planning, refilling and wastewater recovery.
Cleaning effect and drying result depend on the floor material and recovery system.
Runtime, charging and maintenance plans affect daily operation.
Route evidence is stronger than one isolated specification.
Model-sensitive values can vary by market, option package or production batch.
Site fit depends on aisle width, storage space, delivery access and operator movement.
Selection Notes
Use these notes together with the visible product description, specification table, images and support documents before sending an inquiry.
E100 Floor Scrubber is presented as an ELEREIN Walk behind floor scrubber product. Use the visible product description, images and specification table together when verifying whether it fits a facility cleaning task.
Best-fit signals include floors that need wet cleaning, wastewater recovery, planned cleaning routes, suitable tank capacity and enough turning space for the selected model.
Check the visible specification table first, especially cleaning width, squeegee width, solution and recovery tank capacity, battery or power setup, runtime, brush or pad configuration, noise level and gradeability. Confirm any missing field with ELEREIN before ordering.
Product knowledge chain
Use ELEREIN knowledge pages, FAQ answers and evidence pages to check selection criteria, maintenance points, factory capability and support resources before inquiry.
Product FAQ
These short answers help buyers verify usage, selection logic, maintenance requirements and support documents before sending an inquiry.
E100 Floor Scrubber is an ELEREIN Walk behind floor scrubber product for commercial or industrial cleaning teams that need a suitable machine or tool for planned facility cleaning work. The product description on this page should be used together with the visible specification table when checking whether the model fits a specific site.
Check the visible specification table first, especially cleaning width, squeegee width, solution and recovery tank capacity, battery or power setup, runtime, brush or pad configuration, noise level and gradeability. Confirm any missing field with ELEREIN before ordering.
A floor scrubber is usually chosen when the site needs wet cleaning and water recovery, while a floor sweeper is better for dry dust, debris and pre-cleaning. Match the model to floor type, traffic level, water recovery needs and drying-speed requirements.
Water streaks are usually related to worn squeegee rubber, poor squeegee angle, blocked recovery hose, dirty recovery tank seal or uneven floors. Inspect these points before assuming the machine size is the problem.
Confirm daily tank rinsing, squeegee rubber inspection, brush or pad cleaning, recovery hose checks, filter cleaning, battery charging rules and the recommended spare-parts list before putting the machine into routine operation.
Request the latest product sheet, user manual, packing details, warranty terms, spare-parts list, available certificates, product photos or videos, and any OEM/ODM configuration limits that apply to the selected model.
Stainless Steel 304Squeegee Bracket
Double water injectionhole design
Racing steering wheel
Aviation plug design,<br> waterproof
Anti-collision wheel design
Large storage collection box
Storage hook design
Front LED Energy-saving lamp
Ametek three layer ULclass A vacuum motor
The wiper connecting rod structure is not easy to deform
Cleaning rate up to 5100㎡/h. Dual 17-inch brushes, 86cm scrubbing width and 115cm squeegee width provide wider coverage in one pass.
120L solution tank and 130L recovery tank reduce frequent refilling. Equipped with 4×200AH large batteries, supports 6–8 hours continuous working.
550W powerful vacuum motor with 1720mmH₂O suction, dries floors quickly without water marks.
Front-wheel drive for smooth control. Max 20% gradeability, suitable for ramps, narrow aisles and complex environments.
Ergonomic seat, steering wheel control, warning lights and safety protection ensure comfortable and safe long-hour operation.
Brush discs, rubber strips and other wearing parts are easy to replace. Modular structure lowers long-term maintenance cost.
Ask for the product